Your cart
There are no more items in your cart
Collet tightness checking
You should check your collet tightness once a month.
Also when the margins are thinner than expected, collet tightness is the first to examine.
"""Video for both cleaning and tightness"""
Checking air pressure and humidity
You can check both the air pressure from the gauge and humidity on the plastic tube on the conditioner which is located at the back. """çizim koy"""
You can check the air pressure from the gauge: """çizimle gauge"""6 barlık bir çizim koyalım yada fotoraf koyalım"""
You can check the humidity from the tube: You can tell from condensed water drops or water that has accumulated inside. ""çizim koy""
Checking water/oil ratio
Warning!Make sure to use distilled water with your mixture.
Water in your liquid tank evaporates in time resulting in a higher ratio of cutting liquid/water than desired.
Drop a few drops of your current liquid mixture in the liquid tank on the refractometer with the help of the pipette. ***çizim***
Direct the refractrometer towards a light source then check the measurement. ***çizim***
If the water/cutting liquid ratio
*tablo ile de anlat ( kontrol hatalı olabilir.).
Calibrations
InformationCalibrations should be done when there is a drastic change in ambient temperature or when you have imperfect results on your jobs.
Calibration is the act of comparing a device under test of an unknown value with a reference standard of a known value. A person typically performs a calibration to determine the error or verify the accuracy of the device under the test’s unknown value.
The metal expands/contracts when heated/cooled. Length, surface area, and volume will increase and decrease with temperature rise and fall. The degree of thermal expansion varies with different types of metal. The direct effect of temperature changes on machines is on the metal parts.
Three main reasons for the temperature changes are weather, ambient temperature, and heat generated throughout the machine itself due to friction and electronic components. The only variable we can control in this scenario is ambient temperature. The ideal temperature for Yenadent machines is between 20°-25° Celsius.
Std video
B axis video
Premill çizim olmalı diye düşünüyorum
6p var eski 6p var 20p premill var