D14 MAX - Milling machines

D14 MAX

Adapt and optimize.

20P premill

Disc

Contrary to popular belief, Lorem Ipsum is not simply random text. It has roots in a piece of classical Latin literature from 45 BC, making it over 2000 years old.

It is a long established fact that a reader will be distracted by the readable content of a page when looking at its layout.

Premill and disc

We upgraded D14 with new electronics, an industrial PC, and 4 times stronger servo motors with absolute encoders. Drastically reduced the need for calibration, eliminated the need for referencing, and increased speed and accuracy significantly.

Speed comparison

The milling tests were done with the YenadentCAM software, same tools, and same tool-paths. Both machines milled the same designed jobs. The only difference is the machines.

	D15 MAX	D15
BiteSplint	11 minutes	15.1 minutes
Single	8.37 minutes	13.02 minutes
Full anatomic	8.15 minutes	19.30 minutes
Bridge	14.07 minutes	36 minutes

	D15 MAX	D15
Telescope secondary	16.20 minutes	35.27 minutes

	D15 MAX	D15
Simple crown	4.41 minutes	11.32 minutes
Full anatomic crown	7.03 minutes	18.09 minutes

400
watts

Fast and
precise.

tool holders.

400 watts

Fast and precise.

Easier to use.

Easier to learn and easier to use. Harder to make mistakes.

Wider access.

Disc and tool replacement and machine maintenance are way easier with wider access.

Table

Water tank

Chiller unit

Vacuum unit

Options

Compatible with almost every CAM software available in the dental industry.

Open system.

Specifications

Travel limit X axis	200 mm
Travel limit Y axis	100 mm
Travel limit Z axis	90 mm
Travel limit A axis	+-28 degrees
Travel limit B axis	+-28 degrees
Smallest controllable increment	0,1 µm
Accuracy	10 <µm
Repeatability	2 <µm
Max. feedrate X Y Z axis	200 mm/s
Max. feedrate A B axis	20 rpm
Spindle manufacturer	IMT
Spindle power	1300/2700 watts
Spindle speed range	60000 rpm
Spindle maintenance lifetime	3000 Hours
Max. power consumption	2,7 kW
Average power consumption	1 kW
Power supply	220 V 50 Hz
Coolant	29 Liter
Machining envelope / discs (diameter)	97-99 mm
Physical size (WxHxL) / Machine	60x70x80 cm
Weight / net	140 kg
Weight / gross (For freight)	150 kg
Standby noise	≥63 db
Running noise	≥70 db
Automatic tool changer	28 Tools
Axis motors	AC Servo
X Y Z Axis motor powers	400w
A B Axis motor powers	100w
Position control	Abs Encoder
Axis switches	-