Alt

Alt METAL Alt ZIRCONIUM Alt PMMA Alt CERAMIC Improved in every way. We upgraded D15 with new electronics, an industrial PC, and 4 times stronger servo motors with absolute encoders. Drastically reduced the need for calibration, eliminated the need for referencing, and increased speed and accuracy significantly. With D15 MAX, you can mill anything in the dental industry.

Speed comparison

The milling tests were done with the YenadentCAM software and same tools. Both machines milled the same designed jobs. The only difference is the machines.

 

D15 MAX

D15

Telescope secondary

16.20 minutes

35.27 minutes

 

D15 MAX

D15

Simple crown

4.41 minutes

11.32 minutes

Full anatomic crown

7.03 minutes

18.09 minutes

 

D15 MAX

D15

BiteSplint

11 minutes

15.1 minutes

Single

8.37 minutes

13.02 minutes

Full anatomic

8.15 minutes

19.30 minutes

Bridge

14.07 minutes

36 minutes

Stronger tools

Home Page

YT404

TM221400735
€93.00
PMB400-16 / Spherical 4 / 16 mm It can only be used with DC40, D43N and D15 MAX

Prepare to be amazed by lightning-fast PMMA milling.

D15 MAX's uncompromised durability gives you the freedom to use stronger tools. You can confidently tackle larger milling tools while achieving incredible speeds, allowing you to mill bite splints within few minutes.

Alt 28 tool holders. 28° maximum milling angle. 400 watts Fast and precise.

Alt Easier to use. Easier to learn and easier to use. Harder to make mistakes. Wider access. Disc and tool replacement and machine maintenance are way easier with wider access.

Alt Half holder Table Water tank Chiller unit Vacuum unit Options

Alt Compatible with almost every CAM software available in the dental industry. Open system.

Alt

Specifications

Travel limit X axis

200 mm

Travel limit Y axis

100 mm

Travel limit Z axis

90 mm

Travel limit A axis

+-28 degrees

Travel limit B axis

+-28 degrees

Smallest controllable increment

0,1 µm

Accuracy

10 <µm

Repeatability

2 <µm

Max. feedrate X Y Z axis

200 mm/s

Max. feedrate A B axis

20 rpm

Spindle manufacturer

IMT

Spindle power

1300/2700 watts

Spindle speed range

60000 rpm

Spindle maintenance lifetime

3000 Hours

Max. power consumption

2,7 kW

Average power consumption

1 kW

Power supply

220 V 50 Hz

Coolant

20 Liter

Machining envelope / discs (diameter)

97-99 mm

Physical size (WxHxL) / Machine

60x70x80 cm

Weight / net

140 kg

Weight / gross (For freight)

150 kg

Standby noise

≥63 db

Running noise

≥70 db

Automatic tool changer

28 Tools

Axis motors

AC Servo

X Y Z Axis motor powers

400w

A B Axis motor powers

100w

Position control

Abs Encoder

Axis switches

-

The product specifications and features are subject to change without prior notice. The product received may vary slightly from the specifications listed on our website due to ongoing improvements.

Product added to wishlist
Product added to compare.