D10 MAX

Faster than your bigger machine.

Mill every soft material in dental industry with D10 MAX.

Zirconium

Pmma

Wax

Peek

Ceramic

Result

0.5

kW spindle

60,000

RPM

90°

A axis milling angle

B axis miling angle

360°

tool holders

axis

Speed comparison

The milling tests were done with the YenadentCAM software, with the same tools. Both machines milled the same designed jobs. The only difference is the machines.

Pmma
Zirconium

	D10 MAX	D10
Single	13.28 minutes	18.37 minutes
Bridge	23.20 minutes	32.08 minutes

	D10 MAX	D10
Single	6.34 minutes	17.26 minutes
Bridge	25.36 minutes	32.03 minutes

Liquid tank

A must for ceramic milling.

Vacuum unit

Makes it easier to deal with zirconium dust.

A good place to keep a vacuum unit, a liquid tank, etc.

Table

Compatible with almost every CAM software available in the dental industry.

Open system

Specifications

Travel limit X axis	100 mm
Travel limit Y axis	200 mm
Travel limit Z axis	100 mm
Travel limit A axis	+-360 degrees
Travel limit B axis	+-(-90 +30) degrees
Smallest controllable increment	5 µm
Accuracy	10 <µm
Repeatability	5 <µm
Max. feedrate X Y Z axis	80 mm/s
Max. feedrate A B axis	10 rpm
Spindle manufacturer	IMT
Spindle power	500 watts
Spindle speed range	60000 rpm
Spindle maintenance lifetime	3000 Hours
Max. power consumption	0,75 kW
Power supply	220 V 50 Hz
Coolant	20 Liter
Machining envelope / discs (diameter)	97-99 mm
Weight / net	90 kg
Weight / gross (For freight)	110 kg
Standby noise	≥63 db
Running noise	≥70 db
Automatic tool changer	12 Tools
Axis motors	Microstepper
X Y Z Axis motor holding torque	1.3N
Axis switches	Mechanical

The product specifications and features are subject to change without prior notice. The product received may vary slightly from the specifications listed on our website due to ongoing improvements.