Zirconia Highly Translucent Anterior Plus MultiColor

Our new first-class product DEGOS Anterior Plus MultiColor is an impressive allrounder.

Medical device class IIa - Made in Germany.

Thickness (mm)

Color

Last items in stock

€159.00

This discount applies to all DEGOS and MESA products.

Please contact us if you want to purchase 1000 pieces or more.

Quantity	Unit price	You Save
10	€159.00	€159.00
100	€159.00	€3,180.00

Structural features

• Fully anatomical crowns and bridges up to 14 units.

• Reduced works for veneering, e.g. in minimal layering or cut-back technique.

• Inlays, onlays, Maryland bridges.

• Telescope primary parts.

ZrO2+HfO2: 86.3% 94.2%
Y2O3: 5.8%～9.7%
Fe2O3: <0.5%
Al2O3: <0.5%
Er2O3: <2%
Other oxide: <0.5%

The coefficient of linear thermal expansion (25-500°C)

(10.5±0.5) x 10-6·K-1

• Extremely high translucency (~48%) - comparable to lithium disilicate.

• Up to 8 colour layers reproduce the natural structure of a tooth in a flowing, stepless progression.

• The colours completely penetrate the zircon.

• Can be customised with commercially available stains after sintering.

• Can also be used with commercially available veneering ceramics.

2 Start the milling process.

3 Remove milled framework from blank and pre-trim with diamond disc.

4 Remove dust from the framework with air gun.

5 Color frame with coloring liquid, final-dry frame under infrared lamp (see manual for coloring liquid).

6 Load into furnace.

7 Select sintering program and start sintering (see sintering schedule).

8 Remove sintered framework from furnace after the furnace temp drop to room temperature.

9 Check frame on working model for sitting and margin fit. Trim with grinder and polisher if required.

10 Blast using dia-50 micron Alumina at pressure 2-2.5 bar. Clean frame with brush using water. Do not steam-clean.

11 Frame is now ready for veneering, choose porcelain and glaze to finish the restoration.

Reference TM211700038

In stock 4 Items

ean13 8681920007519