Milling tools

A milling tool is a cutting tool used in a milling machine to remove material from a workpiece by rotating the cutter against the workpiece. Milling tools come in various shapes and sizes and are designed for specific milling operations, such as face milling, end milling, slot milling, and so on.  The cutting edges of the milling tool interact with the workpiece to produce a machined surface with a desired shape and size. 

To improve the lifespan of your milling tools, you can follow the steps below.

 Choose the right tool for the job based on material, finish requirements, and cutting conditions.

 Regularly inspect your tools, and replace them as needed.

 Follow the specific cutting speed, feed rate, and depth of cut.

●  Use proper cutting techniques and avoid applying too much pressure on the tool.

 Use a suitable coolant or lubricant to reduce heat and wear on the tool.

 Store tools in a dry, clean place to prevent corrosion and damage.

Primary milling tools for implant applications

Primary milling tools for crowns and bridges

Tool dimensions

Tool nameDiameter (R) mmLength (L) mmBead (B) mmTool length (T) mmMilling depth (E) mmShaft (S) mmTip typeCam code
YT1012165452515SphericalZRB200-16
YT1021165452515SphericalZRB100-16
YT1031.8165452515CylindricalZRF180-16
YT1041.4165452515CylindricalZRF140-16
YT1050.6105402015SphericalZRB060-10
YT1061205552822SphericalZRB100-20
YT1072225603025SphericalZRB200-22
YT1081165402510SphericalMEB100-16
YT1092165402510SphericalMEB200-16
YT1100.20.55402015SphericalZRB020-05
YT2012125452020SphericalMEB200-12
YT202185452020CylindricalMEB100-8
YT2031.8105452020CylindricalMEF180-10
YT2041.485452020CylindricalMEF140-8
YT2050.535452020CylindricalMEF050-3
YT2060.645452020CylindricalMEB060-4
YT2073125452020SphericalMEB300-12
YT3012165402015SphericalCRB200-16
YT302155401718SphericalCRB100-5
YT3030.6115401718ConicalCRC060-11
YT3043165402015SphericalCRB300-16
YT4011165452515SphericalPMB100-16
YT4022165452515SphericalPMB200-16
YT4032125452515Cylindrical
YT404485501629SphericalPMB400-16
YT5011165452515SphericalPMB100-16
YT5022165452515SphericalPMB200-16

YT201

TM210800010
MEB200-12 / Spherical 2 / 12 mm
€32.00

YT202

TM210800008
MEB100-8 / Spherical 1 / 8 mm
€32.00

YT203

TM210800017
MEF180-10 / Cylindrical 1.8 / 10 mm Premill calibration tool
€32.00

YT204

TM210800016
 MEF140-8 / Cylindrical 1.4 / 8 mm
€32.00

YT205

TM210800015
 MEF050-3 / Cylindrical 0.5 / 3 mm
€37.33
Showing 1-5 of 5 item(s)
Product added to wishlist
Product added to compare.